Watson Packer

Retrievable Packers

 

CRP Rotation Set Packer

EXCLUSIVE WATSON PACKER TOOL! OUR BEST SELLER!

The CRP packer is a rotation set packer designed to run below a down hole gas separator. It uses a Tubing Anchor Catcher to anchor the packer to the casing. After the packer is set there is no movement to wear out the slips or other parts, allowing it to stay set under the most severe conditions. Download PDF

WRL Production Packer

The WRL Production Packer is designed to withstand the cyclic loads placed on the packer in a rod pumping well but may be used in other production packer applications as well. Download PDF
 

ASI-X Packer

The ASI-X is our most versatile mechanically set, retrievable packer. It may be used in any production application and is best suited for treating, testing and injecting in shallow to deep pumping or flowing wells. It features a large internal bypass to reduce swabbing when running or retrieving. It can be applied in tension or compression depending on well conditions and the required applications. When the packer is set the bypass closes and when retrieving the bypass opens before releasing the upper slips to allow pressure equalization. Download PDF
 

VSI-XW Wireline Set Production Packer

The VSI-XW Single String Double Grip Production Packer is one of the most versatile packers on the market. It is a modification of the ASI-X packer with the advantage of being able to set on electric line or hydraulically. Download PDF
 

Lok Set Packer

The Lok-Set is a compression set, retrievable packer that allows the tubing to be left in a tension, compression, or neutral condition. Application is mostly production, injection and zone isolation operations. Download PDF
 

R-3 Double Grip Packer

The R-3 is a double grip, compression set, retrievable packer that is mostly used in production, stimulation and testing operations. Download PDF
 

ASII Packer

The ASII Packer is a double grip, compression set tool ideally suited for treating, testing and production applications. The ASII features a large bypass area to prevent swabbing when running or retrieving. Once the tool is set, pressure from above or below acts down on the valve maintaining the seal and preventing upward movement of the tubing. Releasing the valve allows debris to be washed from the upper slips. Download PDF
 

ASIII Packer

The ASIII Packer is a single grip packer with no upper hold down for use where no differential pressure from below is present. From the packing elements down, the ASIII operates identically to the ASII.  The ASII also features a large bypass area to prevent swabbing when running or retrieving.  The ASIII is ideal for isolating casing holes or perforations when used as the lower packer in conjunction with the Snapset as the upper packer. Download PDF
 

AS-5 Packer

The AS-5 Packer is a compression set tool with a J-slot to control pack-off. It is run above other packers such as the ASIII to selectively treat, produce or inject in multiple zone completions. It is also used to isolate casing hole perforations. The AS-5 features a large bypass area to prevent swabbing when running and retrieving. Releasing the valve allows debris to be washed from the upper slips. Download PDF
 

AD-1 Tension Packer

The AD-1 is a tension set, retrievable packer. Applications are for waterflood, shallow or low fluid level wells with insufficiant tubing weight to set compression packers. Download PDF
 

SL Shear Tension Packer

The Type SL Shear Tension Packer is an economical, compact tool for injection, pumping, medium range treating and production applications. This packer is set by 1/4 right-hand rotation of the tubing and then pulling tension. To release this tool the tubing is slacked off and the packer automatically rejays into the release position. This packer also has an adjustable straight pull, safety shear release and a right-hand rotation release allowing retrieval of the tubing string. Download PDF
 

Type H Tension Packer

The Type H Tension Packer is for use in water flood, injection or producing wells. This tension packer has a built in safety system to eliminate problems should conventional retrieval methods fail. Right hand rotation releases the first safety joint allowing the slips to pull off the cone and release the packer. Should the packer fail to release, a second safety joint can be broken to release the packer. This safety feature allows for circulation down the tubing to remove debris. Download PDF
 

Snapset I Packer

The Snapset I Packer is a compression set tool requiring only straight set down weight to pack-off. It is run above other packers such as the ASIX, ASII or ASIII for selective production to isolate casing holes and perforations. This packer has no upper or lower slips and should be used only where intermediate differential pressures from below are expected. The Snapset has an internal latch to prevent the packer from presetting when running down the hole. When releasing, the latch re-engages to allow movement down hole. Download PDF
 

Snapset II Packer

The Snapset II Packer is a compression set tool requiring only straight set down weight to pack-off. It is run above other packers such as the ASIII to selectively treat, produce or inject in multiple zone completions. It is also used to isolate casing hole perforations. The Snapset II features a large bypass area to prevent swabbing when running and retrieving. Once the tool is set, pressure from above or below acts down on the valve maintaining the seal and preventing upward movement of the tubing. Download PDF
 

Hydroset II Packer

The Hydroset II is a hydraulic set, mechanically held dual string production packer run above a single string hydraulic set or wireline set seal bore packer. Its short length makes it ideal for deviated wells or doglegs. Because no tubing manipulation is required to set this packer, the well head can be installed and flanged up before setting. It is available with short or long string setting capabilities and a variety of tubing connections. It is also adaptable for submersible pump applications. Download PDF
 

GV-Cup Packer

The GV Cup Packer is an economical means for isolating casing leaks and depleted zones and is also a production or injection packer for low pressure applications. This packer can be run with cups opposing or in the same direction depending on the application. The GV Cup Available with packing element backup rings for higher pressure applications and comes in a full range of tubing and casing sizes in two or four cup models. Download PDF
 

Big Bore Casing Packer

The Big Bore Casing Packer is a large bore single grip tool used to isolate damaged casing and for production or injection. It can be run in tension or compression and can be used as a liner hanger when equipped with a right hand release sub. Coarse, deep wickered slips allow the packer to set in open hole or scaly casing. For open hole set, casing packers can be equipped with two elongated packing elements to assure a positive seal. Download PDF
 

Gas Vent Pumping Packer

The Gas Vent Pumping Packer offers an inexpensive option for isolating casing leaks or depleted perforations in pumping wells. This tool prevents gas lock by allowing gas to vent to the surface past damaged zones. The interval between top and bottom cups can be any length. Available with single or multiple cups. Download PDF
 

Scab Liner Packer

The Scab Liner Packer (SLP) is an economical alternative to cement squeezing casing leaks or to isolate perforations. The system consists of an upper and lower packer with liner attached between them. Since the SLP uses packer-type sections it has proven to be much more durable than cup-type scab liners. The ID.s through the system are generally limited by the liner and frequently allow injection or production tubing to be run through the system and attached to existing tools below the SLP. Download PDF
 

Type DL-1 Tandem Tension Packer

The DL-1 Tandem Tension Packer is an economical, compact, low-pressure, tension set, isolation packer used in casing or perforations and multi-zone injection installations. This packer runs with a tension set packer below. It can be run with the j-pins in the unjayed or jayed position. In the unjayed position applying tension shears the shear pins and allows pack-off. If run in the jayed position the DL-1 must be used with the ASI-X Packer. Set down weight shears the pins and left-hand rotation and applied tension will set the tool. Download PDF
 

Set Down Isolation Packer

The Set Down Isolation packer is an economical, compact compression set tool used to isolate casing or perforations. It can also be used in multi-zone injection applications. It runs above a compression set packer such as the AS-II or AS-III. Applied compression will shear the shear screws and allow pack-off. Straight pick-up releases the packer. Download PDF


Back to Products page